- [Instructor] When adjusting your systems options
to increase your performance
another good setting to look at is the drawing setting.
So here I've selected drawings
and you can see below it, there's three fly outs
for Display Style, Area Hatch and Fill and Performance.
So in the Display Style we want to go ahead
and change edge quality
for wireframe and hidden views to draft quality.
We want to make sure that the edge quality
for shaded edge views is also draft quality.
This is going to help increase our performance.
If you want, you can also turn off tangent edges
and remove them, but that might make it hard to tell
what's going on with a part.
But again, less geometry, less to process.
And then if we go over the performance section
a few releases ago they moved all these options
out of the drawings and down to performance
so you can quickly go to them to adjust your performance
and you're going to basically unselect all of these.
You don't want to show content while dragging,
you don't want to allow auto-update when opening drawings,
you don't want to save tessellated data
and you also want to turn off automatic solve mode.
Now going through these options,
showing contents while dragging and drawing view
is just as simple as that.
When you grab a drawing view and drag it across the screen,
it shows you the model.
That won't happen any more,
you'll just see the outline of the view, which is fine.
It'll save you a lot of time.
Allowing auto-update when opening drawings
makes it so that if you have a large drawing,
it's going to try to auto-update every single view in it
when you open it, which isn't required.
You only need to update the views that you're changing.
Saving the tessellated data for drawings
with shaded and draft quality views,
is not really that important.
If you're having a drawing quality issue,
you can turn that option back on.
The one that is important is this automatic solve mode.
If you're working with drawing
that have large sketches in it,
you might need to have this option on
to be able to handle some of the geometry.
But by turning it off, you're going to have less
automatic relations in that sketch, in your drawing,
which is going to make a faster, smoother drawing.
Once you're done changing all these options,
you simply go down and click OK.