This is probably the first time you've seen a cutting die, so let me explain
what's going on here. This is a cutting die that's going to cut
out some little cards that have rounded corners on them, so, the job has been
printed with the cards in position, 12 up And let's take a look at one of the cards.
They're little rounded rectangles. These are cutting blades, so, you might
want to think of them sort of like razor blades that have been shaped.
And when this dye presses into the paper, it's going to cut out the shape of that card.
But you notice that there are other little blades that are attached to the cutting
blades, so what do they do? Well, when the card is punched out of the
paper, tey need an easy way to pull off that excess paper, the waste.
So those other little cutting blades allow them to punch little lines into the paper,
and easily strip off the excess. And so that's a process called stripping.
And that's to pull off that excess. That waste paper.
And those little pieces of foam that you see around the blades.
Serve as a way to sort of absorb that pressure as that die hits the paper and
they keep the paper in position, they keep it from squirming so that the cut is precise.
So how does a die like this come in to being?
Well you can see the plywood background. How do those blades get in position and
those little pieces of foam. Well, in the olden days every bit of this
was done by hand. Careful measuring, manual shaping of those
blades, mounting those blades in that plywood base.
Now there's a lot of computerized control. So, you see CAD programs that create the
dyes and they route little troughs in that plywood and those little troughs serve as
the positioning places for those blades. Those same CAD programs also drive
machines that bend those blades so things that used to be done by hand are now
accomplished by machine, but not every bit of it.
Those blades have to be manually mounted in these little troughs.
Those little pieces of foam have to be manually positioned but that's not a
mechanical process. There really still is a lot of
craftsmanship involved in making a die like this.
The die maker has to understand how that die behaves when it presses into the stock.
He has to know exactly the right height for that little blade to sit in that
little trough, so there's quite a bit of tweaking that happens.
So even though we have precision because of computers we still need that artisan,
we still need that craftsmanship and that's what to me really makes die making
an art.