- [Instructor] In this last video of this chapter
I'm gonna talk about quickly
how to make a modification or an edit
to either the solid or the sketch.
As I go through I can either double-click
from the tree or I can double-click out here
in the graphics window.
So if I double-click on something,
I'm telling it that I want to make a modification.
Once I go back into the Sketcher,
I can make a modification to that sketch.
Once I have the modification that I need,
I can just simply hit finish.
Once I exit out of the sketch,
you'll notice that the solid updates.
I'm just gonna go ahead and fit once again.
Right-mouse-click, Fit.
If I need to do the same thing with one of the edge ones,
once again I can either make the modification
on the solid out here, or I can double-click on it
in the Part Navigator.
If I come in here and say all right,
double-click on those blends.
I need to make these a little bit bigger.
I can enter in my value,
and as soon as I select OK,
you'll notice the update happens.
To sort of recap, we just go in.
If we see something we need to change,
you double-click on it.
If there's a value there, you double-click on the value,
select OK, OK, and then once you're done,
the model just basically updates
if the edit that you are performing
is something that the model can update to.
If you've done something like created a edit
where the blends would overlap and it can't apply it,
it'll come back and throw up a warning for you.
That's just the basic work flow of how NX works.
You create your sketch.
You create a solid off of that sketch,
and then you apply additional features to the sketch
once you have that solid.