- [Narrator] Here I want to talk about
the start of the basic workflow within CATIA V5.
So I'm going to go into File,
New
select part, select okay.
Again, I get my New Part window that pops up,
I'm going to leave the part name,
just Part 1 by default,
and make sure Enable Hybrid Design is turned off,
and everything else is turned off, and select okay.
Now that I've created my initial part,
I'm going to go in, and create my first sketch.
I'm going to select my sketch icon,
I'm going to pick my x-y plane,
I can either pick it out of the tree
or I can pick it in the window.
You'll notice, as soon as I select my sketch plane,
my view orients itself to the sketch.
Here I have a whole bunch of new tools available
to me now that I'm in the sketch toolbars,
which I will be discussing in the next chapter.
But for now, just want to talk about the workflow.
So here, I'm just going to simply create a rectangle,
I'm going to draw in from my origin point, out,
and I'm going to draw in another rectangle,
I'm going to draw in, and out.
Now that I have my dual rectangles drawn in,
I'm going to trim away
the extra curve that I don't need,
just like that.
Now that I have those removed,
I'm just going to go ahead and apply a couple of fillets,
enter in the radius that I want,
and constrain my sketch.
(mouse clicking)
There we go, now that I have my sketch constrained,
I'm going to exit out.
So that's the basic first step of any design,
entering your part, creating a sketch
on the appropriate plain, and you'll notice
the sketch is now nested underneath the part body.